Troubling Documents in Rossi Case

Rossi et al. v. Darden et al. (1:16-cv-21199), Florida Southern District Court.
The ongoing federal litigation between Andrea Rossi and the principals of Industrial Heat LLC has revealed some troubling documents and correspondence regarding the testing of the E-cat system.  All of the filings and motions may be found here.
Exhibit 5 – Is a list of questions IH’s engineer, Joe Murray, sent to Fabio Penon, the Expert Responsible for Validation (ERV), questioning some of the data from the preliminary reports issued by Penon.  These questions include some troubling observations about the equipment and measuring techniques used.  Apparently these questions were never answered and Penon has yet to respond to this lawsuit.
Document 118-01 – Is a compilation of email communications between Andrea Rossi and the agents of J.M. Products, Inc. (JMP), the purported customer making use of the E-Cat’s excess heat.  Rossi seems to exert an unsettling amount of control over JMP’s operation.  In emails with James A. Bass, the Director of Engineering for JMP, Rossi appears to be “coaching” Bass on what to say to observers, with Bass asking Rossi, “My question is, will the people I meet tomorrow want to know anything technical?”  In another email, Rossi tells an assistant to Henry W. Johnson, Rossi’s attorney and organizer of JMP, that he will transfer $500 from Leonardo Corporation to the JMP account, which had apparently been overdrawn.

Researchers Shocked at UK's Plan to Exit EU Nuclear Agency

In a surprise move, apparently in the wake of Brexit planning, the UK has announced it will no longer participate in the European Union’s nuclear agency Euratom. This could lead to less funding for the world’s largest fusion experiment, the International Thermonuclear Experimental Reactor (ITER) in Cadarache, France. Billions of dollars in research into hot fusion has resulted in very little and potentially misleading progress, while modestly funded LENR firms, such as Brillouin Energy, have demonstrated excess power in repeatable testing.
Full article at

Stanford Energy Club: Nuclear Energy Community Kickoff: LENR Panel

A meeting of the Stanford Energy Club’s Nuclear Energy Community was held on January 25, 2017 and the panel members included many LENR notables:
Carl Page and Frank Ling – Anthropocene Institute
Fran TanzellaStanford Research International
Alan Goldwater and Bob Greenyer – Martin Fleischmann Memorial Project
Robert Godes of Brillouin Energy makes an appearance, but unfortunately does not speak due to apparent time constraints.

Bill Gates on Opportunities in Energy

Speaking at Columbia University, Bill Gates told the crowd that if he were to drop out of school today, there were three promising fields he might choose: artificial intelligence, biotech and energy.

“Gates said there is a huge and growing demand for energy that’s “reliable, cheap, and clean.” And Gates said there is no system yet today that can provide enough energy that meets those criteria. That’s why he sees energy as an area of opportunity for innovative minds, he told the audience of mostly university students. “The innovations [in energy] will be profound,” said Gates. “And there are many paths to get to where we need to go.”

The full article is published here.  Gates is a quiet supporter of LENR technology and research at Texas Tech and has pledged to spend $30 billion developing alternative energy.  LENR may be one of the paths Gates expects will lead to our energy independence.

Airbus Files More LENR Patents

Airbus continues to position itself for the application of LENR technology by applying for two additional patents.  In 2015, Airbus also published a patent for LENR power generation.
The first is for: Material arrangement for fusion reactor and method for producing the same:
“A material arrangement for a fusion reactor comprising at least one material which is configured as a foam-like carrier material for condensable binding and fusing of hydrogen. The carrier material is provided with positively charged vacancies for condensing hydrogen atoms, small pores for receiving the condensate and for accelerating the condensation after previous penetration of atoms or molecules into these, and large pores for transporting a catalyst into the small pores. Furthermore, a method for producing the material arrangement is disclosed.”
The second application is for Method and Apparatus for Generating and for Fusing Ultra-dense Hydrogen:
“A method for generating and for fusing ultra-dense hydrogen in which molecular hydrogen is fed into at least one cavity and catalyzed, where the splitting and subsequent condensation of the molecular hydrogen is initiated on a catalyst of the cavity to form an ultra-dense hydrogen. The ultra-dense hydrogen is exposed to pressure or electromagnetic radiation to initiate fusion of the ultra-dense hydrogen in the at least one cavity and the reaction heat is led out from the at least one cavity. The pressure as mechanical resonance or the electromagnetic radiation as electromagnetic resonance amplifies the field and therefore the effect. Also, an apparatus for carrying out the method is disclosed.”

XPRIZE Competition to Design Abundant Clean Energy Technology

Link to competition XPRIZE.
Can the way we generate energy be FUNDAMENTALLY transformed?
We believe the world will be much better if global clean energy generation is dramatically improved beyond current choices – and that’s why we’re developing this XPRIZE.
On a planet awash with energy, in a universe where all matter is made of immense amounts of energy (E=mc2), we find our society forced to make bad choices for most of our energy supply from a set of technologies as old as the transistor, not to mention fire.
There are countless reasons why we need new and better sources of energy, from climate change to pollution to poverty and more. The vast majority of mankind’s current energy use is coming from unsustainable and damaging sources. We need something better.
• Low Energy Nuclear Reactions (LENR) of various designs
• Energy generators sourcing energy from Ionosphere/Van Allen Belt/Vacuum
• Energy capture from gravity
• Energy capture from permanent magnets
• More hydrogen generated from water than predicted by chemistry
• Zero Point Energy
• Advanced solar technologies resulting in higher efficiency – eg., optical rectenna
• Reactionless generators and/or regenerative motors

Brillouin Energy Announces Breakthrough

Researchers at SRI International are reporting that they have successfully replicated “over unity” amounts of thermal energy (heat) for Brillouin Energy Corporation’s most advanced Isoperibolic (“IPB”) Hydrogen Hot Tube™ (HHT™) reactor test systems based on controlled low energy nuclear reactions (“LENR”). Researchers at SRI conducted a series of third-party tests of Brillouin Energy’s IPB HHT™ LENR reactor test systems from March to December 2016. Dr. Francis Tanzella, principal investigator and Manager of the Low Energy Nuclear Reactions Program, was assigned to SRI’s testing of Brillouin Energy’s LENR systems and conducted all of the third-party validation work.

In its Interim Progress Report, SRI summarizes its extensive testing of five identical Brillouin Energy metallic reactor cores, which produced the same over-unity controlled heat outputs, turning the reaction heat on and off repeatedly. “Brillouin Energy appears to have achieved its most groundbreaking test results to-date,” the Report states.

Data from the SRI International test runs show LENR heat outputs up to several watts were repeatedly produced from positive coefficients of performance (COPs) in the range of 1.2X to 1.45X. The Report continues that LENR heat being independently validated with positive COPs is significant: “The LENR coefficients of performance (COPs) may be considered low and small scale however, it would be a mistake to discount them, in light of the accuracy of their calorimetry, the consistent repeatability of their production, their controllability, and the reproducibility and refinement of their manufacturing techniques, specifications, and components, all leading to the same repeated results. Moreover, the transportability of the system is another remarkable achievement”.

“By using standard industrial manufacturing processes for our reactor test systems, we have identified an engineering pathway for manufacturing Brillouin Energy’s IPB HHT™ reactor prototypes,” said Robert Godes, Chief Technology Officer and Co-Founder of Brillouin Energy Corp.

In 2017, Brillouin Energy will continue to work with SRI International in the testing process to help it to engineer and develop its IPB HHT™ reactor test systems, with the goal of evolving them towards LENR prototype equipment systems, which potentially may generate commercial scale LENR Heat on demand for industrially useful applications.

“We are on the cusp of a new era of cheap, abundant and reliable power from LENR technologies, at a time when the United States and many other countries are re-defining their commitments to mitigate the impacts from climate change,” said Robert W. George, Chief Executive Officer, Brillouin Energy.

Brillouin Energy’s LENR technology includes a proprietary method of electrical stimulation of nickel-metal conductors using its Q-Pulse™ control system. The process stimulates the system to produce LENR reactions, which generate excess heat and helium. The excess heat produced is a product of hydrogen and a nickel-metal catalyst. The Q-Pulse™ control system stimulation is the key to maintaining the reaction. Other than the heat output, there are no (zero) toxic or CO2 emissions of any kind.

The SRI Interim Progress Report summarizes all of the data and conclusions from SRI International’s nine months of testing of Brillouin Energy’s IPB HHT™ LENR reactor systems. To view the Report, visit

About Brillouin Energy:
Brillouin Energy is a clean-technology company based in Berkeley, California, which is developing, in collaboration with Stanford Research International (SRI), an ultra-clean, low-cost, renewable energy technology that is capable of producing commercially useful amounts of thermal energy from LENR. For more on Brillouin Energy, please visit

About SRI International
SRI International ( creates world-changing solutions making people safer, healthier, and more productive. SRI, a research center headquartered in Menlo Park, California, works primarily in advanced technology and systems, biosciences, computing, and education. SRI brings its innovations to the marketplace through technology licensing, spin-off ventures and new product solutions.